| Panel TENSION INDICATOR TD-1 TD-1-TE  Provides an accurate tension display for all Check-Line sensors on a bright LED display. It is easy to set up and use, and permits easy flush panel mounting in a 1/8 DIN cutout.  User-set High & Low Alarm Limits with relays 4-20 mA and 0-10 VDC analog output for recording and control
purpose TD-1 provides regulated +5 V DC for SR sensors TD-1-TE provides regulated +15 V DC for THR Sensors (requires
option "A" on Tension Sensor) Optional Connecting Cable for Sensor |
|
|
|
| Specifications | |
| Display Range | 0-1999 |
| Display | 3½-digit Red LED, 14.4 mm high |
| Decimal Point | User selected via internal jumper |
| Power For Sensors | + 5 V DC, regulated
(TD-1) + 15 V DC, regulated (TD-1-TE) |
| Analog Output | 4-20 m A or 0-10 V DC, user selected |
| Frequency Response | 100 Hz |
| Enclosure | High-Impact Plastic |
| Dimensions | 3.78" L x
1.89" H x 4.04" D (96 x 48 x 103mm) |
| Panel Cutout (TD-1) | 92 x 44mm |
| Operation Temperature | 32 to 122° F (0-50° C) |
| Relay Operation | Hi-Hi/Hi or Hi-Lo |
| Relay Rating | 1 Amp @ 250 V AC/30
V DC, normally open |
| Power Required | 115/230 VAC ±10%, 50/60 Hz |
 |
 |
 |
 |
 |
|||
