Wire EDM Tension
Meter
DX2-2000-EDM
DX2-3000-EDM
Manufactures of wire-EDM machines
recommend checking the erosion wire tension once a week. Depending on
the machine type as well as the wire material and diameter, the measured
tension should lie between 50 and 3000 g.
The correct erosion wire tension reduces
wire oscillation and guarantees a pinpoint accuracy of your machines.
Always check the tension in calibration mode on the moving wire. Make
sure the generator is switched off for the tension
check. |
 |
Easy-to-read analog scale
Simple handling
Special versions for specific EDM machines are available
|
|
Measuring range 2000 cN, 3000 cN or higher
Calibration in Grams is available
Other ranges, as well as digital models available, inquire |
| Type |
Measuring
range |
Roller
distance c:c mm |
| DX2-2000-EDM |
50 - 2000 cN |
75 |
| DX2-3000-EDM |
100 - 3000 cN |
75 |
| For gram calibration,
add "-G" to the model number (example: DX2-2000-EDM-G) |
| Specifications |
| Accuracy |
± 1% Full scale or ± 1
scale graduation mark |
|
Humidity |
Maximum 85% RH |
| Rollers |
Material : Hardcoated
aluminum Diameter: 12 mm |
Housing Material |
Aluminum die casting |
| Scale Diameter |
41 mm |
Dimensions |
approx. 215 mm x 90 mm x 44
mm
(L x W x H) |
| Temperature Range |
8 - 45 °C |
Weight |
(net/gross) approx. 500 g /
1000 g |
|
 |
|
|
